BDWHQ - P-W-158E, WAX GEN. PURP. SOLVENT TYPE

  • MSDS: BDWHQ
  • Manufacturer: FEDERATED FRY METALS
  • Product Name: P-W-158E, WAX GEN. PURP. SOLVENT TYPE
  • National Stock Number: 7930-00-298-1945
Product Identification

Product ID:P-W-158E, WAX GEN. PURP. SOLVENT TYPE
MSDS Date:01/01/1985
FSC:7930
NIIN:00-298-1945
MSDS Number: BDWHQ

Responsible Party
FEDERATED-FRY METALS
6TH AVENUE AND 41ST STREET
ALTOONA, PA 16602
US

Emergency Phone: 814-946-1611/800-424-9300(CHEMTREC)

Info Phone: 814-946-1611

Cage: 0C2W5

Contractor
FEDERATED-FRY METALS
ALTOONA, PA 16602 US

Telephone: 814-946-1611/800-424-9300(CHEMTREC)

Cage: 0C2W5

Ingredients

PETROLEUM DISTILLATE

Fraction By Weight: 89%

ACGIH TLV: 166

Hazards

Effects of Overexposure:SEVERE EYE IRRITATION,DRYING OF SKIN.EXCESSIVE
INHAL CAUSES HDACH,DIZZINESS & NAUSEA.

First Aid

First Aid:EYE:CONTACT:FLUSH W/WATER. SKIN CONTACT:WASH W/MILD SOAP &
WATER & APPLY SKIN CREAM.INHALATION:REMOVE TO FRESH AIR & CALL
PHYSCIAN. APPLY ARTIFICIAL RESPIRATION IF NECESSARY.

Fire Fighting

Flash Point:140F TCC MIN 60
Lower Limits:0.7
Upper Limits:6.0
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:BREATHING APPARATUS RECOMMENDED
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HOT SURFACES.

Accidental Release

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER.AVOID EXPOSURE TO SPARKS, FIRE OR HOT METAL SURFACES.

Handling

Handling and Storage Precautions:KEEP AWAY FORM HEAT,SPARKS & OPEN
FLAME.USE ADEQUATE VENTILATION.AVOID PROLONGED OR REPEATED CONTACT
W/SKIN

Exposure Controls

Respiratory Protection:SELF CONTAINED BREATHING APPARATUS FOR
CONCENTRAT ABOVE TLV LIMITS.
Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:360-400F
Vapor Pres:2
Vapor Density:4
Spec Gravity:0.75
Evaporation Rate & Reference:TOLUENE 0.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MILKY LIQUID,SOLVENT ODOR.
Percent Volatiles by Volume:89

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPRAKS,OPEN FLAME & FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE W/LOC,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.